Accéder au contenu principal

OpenMQTTGateway support

After a few years of contributing to OpenMQTTGateway project I see that the scope of the project is exceeding my own home usage, more and more use cases are found by the users. Request of incorporating, gateways, devices, tests are very frequents but I miss devices or components to test with.

So as to continue to extend the OMG functionnalities I've decided to build a list of compatible components and compatible devices with affiliated links
The principle is the following, if you bought something coming from these links there will be a commission for me. This will support my work on OpenMQTTGateway project.

If you are searching for compatible devices here is the list:





If you are searching for compatible components here is the list 

Commentaires

Posts les plus consultés de ce blog

433toMQTTto433 - Bidirectional ESP8266 NodeMCU gateway between RF 433Mhz signal and MQTT

The goal  is to act as a gateway between 433Mhz sensors and a MQTT broker or between the MQTT broker and 433Mhz actuators, It enables to: receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data  publish MQTT data to a different topic related to received 433Mhz signal  It can be an interesting part in an home automation system so as to interface sensors and actuators (wall sockets) with software like openhab . List of compatible sensors here The interest of putting this gateway to an ESP8266 and not on a raspberry pi is to be able to manage security actions at gateway level (power on a siren, cut power to certain devices) following RF data received by sensors without being dependent to the PI for security related actions. [EDIT] all infos are now centralized into  the github repository  take a look at it you will find up to date info about OpenMQTTGateway You need: Software: Mosquitto Arduino IDE latest version (tested ok with 1.6.10

Infrared IR, 433mhz and MQTT on ESP8266 bidirectional gateway OpenMQTTGateway

Following discussions on the home assistant forum people gave me the idea to add Infrared communication to the 433mhz gateway.  The goal is to act as a gateway between 433Mhz sensors, infrared remote controls and a MQTT broker or between the MQTT broker and 433Mhz actuators, infrared devices, It enables to: receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data  publish MQTT data to a different topic related to received 433Mhz signal  receive MQTT data from a topic and send infrared signal corresponding to the received MQTT data  publish MQTT data to a different topic related to received infrared signal  It can be an interesting part in an home automation system so as to interface sensors and actuators (wall sockets), your tv, home cinema, hifi ... with software like  openhab  or home assistant . List of compatible RF sensors here [EDIT] all infos are now centralized into the github repository  take a look at it you will find up to d

SONOFF RF BRIDGE + Pilight or How to extend the supported protocols by our little bridge

With version V0.9 of OpenMQTTGateway  @steadramon  &  @puuu  (the ESP library creator) enabled by their work to integrate Pilight library on OMG. Permiting to increase significantly the list of RF protocols of OMG . But now that we have this interesting possibility and with the goal of OMG of beiing multi boards compatible, why not trying to put Pilight on a Sonoff RF Bridge . So as to do this test I ordered a new one so as to be on the same hardware as most of the users (my other RF Bridge is a demonstration old one) So as to decode RF signals the Sonoff RF Bridge has a special dedicated chip (EFM8BB1)  that communicate with the esp8285 with a serial connection. If we want to increase the number of RF protocols compatibles on the device without modifying the hardware, the only software based solution is to hack the  EFM8BB1. This hack is available and made by @ Portisch . The list of protocol is interesting but at the moment not as big as Pilight one. Maybe I will t