Accéder au contenu principal

New major version of OpenMQTTGateway V0.3

I'm pleased to announce OpenMQTTGateway V0.3 release with the following content:

  • Add BLE beacons detection thanks to HM10 keyes module
This is a major add, you can now detect BLE beacons that are into the gateway perimeter for presence detection, the gateway publish the beacon adress and the signal strength
  • Add the possibility to pass raw data to and from mqtt from and to IR
Now you can pass raw IR signal and receive also them
  • Add RF and IR repeater function
This function enable to increase the range of your devices by repeating the received signals with the gateway.
  • Add the ability to handle RF codes with different bit length than 24
  • Add the possibility to filter unknown protocols for IR
  • Add the possibility to take into account Sony IR protocol special parameters
  • Correct DHT wrong pin assignement
  • Add an option to don't resend dht temperature and humidity when there is no value change
  • Change to GPL V3 license to prepare future libraries add
The new version is available on the github

Commentaires

Posts les plus consultés de ce blog

433toMQTTto433 - Bidirectional ESP8266 NodeMCU gateway between RF 433Mhz signal and MQTT

The goal  is to act as a gateway between 433Mhz sensors and a MQTT broker or between the MQTT broker and 433Mhz actuators, It enables to: receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data  publish MQTT data to a different topic related to received 433Mhz signal  It can be an interesting part in an home automation system so as to interface sensors and actuators (wall sockets) with software like openhab . List of compatible sensors here The interest of putting this gateway to an ESP8266 and not on a raspberry pi is to be able to manage security actions at gateway level (power on a siren, cut power to certain devices) following RF data received by sensors without being dependent to the PI for security related actions. [EDIT] all infos are now centralized into  the github repository  take a look at it you will find up to date info about OpenMQTTGateway You need: Software: Mosquitto Arduino IDE latest version (tested ok with 1.6.10

Infrared IR, 433mhz and MQTT on ESP8266 bidirectional gateway OpenMQTTGateway

Following discussions on the home assistant forum people gave me the idea to add Infrared communication to the 433mhz gateway.  The goal is to act as a gateway between 433Mhz sensors, infrared remote controls and a MQTT broker or between the MQTT broker and 433Mhz actuators, infrared devices, It enables to: receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data  publish MQTT data to a different topic related to received 433Mhz signal  receive MQTT data from a topic and send infrared signal corresponding to the received MQTT data  publish MQTT data to a different topic related to received infrared signal  It can be an interesting part in an home automation system so as to interface sensors and actuators (wall sockets), your tv, home cinema, hifi ... with software like  openhab  or home assistant . List of compatible RF sensors here [EDIT] all infos are now centralized into the github repository  take a look at it you will find up to d

Get your BLE sensors data into Home Assistant in 5 minutes

You can now upload your board directly from the web browser!  So let's imagine you want to read data from a sensor like a Mi Flora, an LYWSD03MMC, a weight scale, or any other BLE sensor from this list  Plug an ESP32 dev board to your computer USB port Go to this website: https://docs.openmqttgateway.com/upload/web-install.html Select esp32dev-ble Click the install button Depending on your board you may have to press the BOOT button Choose the port that the ESP is connected to. Wait until the process is complete. Release the BOOT button That's it, OMG is now loaded into your ESP32 board without Arduino IDE, platformIO or a binary flasher. Here are the steps in images: Now comes the Home Assistant part: Add the MQTT integration and activate auto discovery Create a user and a password (Configuration->Users) without administrator right for the gateway Well, this is enough for Home Assistant. So let's now connect both: Check the Wifi Access points available with your smartph